STUCCOMARMO: slaked lime-based decorative stucco
Treatment of the support:
The application on lime supports is recommended, but it can also be applied on plaster or by-products, old hydropaints, only if strong and well-fixed, after the application of a coat of Primer S
Application:
Spread a coat of STUCCOMARMO with a stainless steel float so as to level the support (photo nr. 1).
When the first coat has dried up, spread a second coat of product if necessary in order to increase the polish effect.
Apply litt le spots of product and then take them away (“put and remove” technique) (photo nr. 2); when the product is going to dry up, press and polish, until the wished result is obtained (photo nr. 3).
Packaging and Colouring
STUCCOMARMO: Lt. 14, Lt. 4,67
ARTHE CONCENTRATO: ml.600, ml.70.
Each article in our colour chart is divided into 4 different grades, each one corresponds to a letter A, B, C, D.
To obtain the colour desired add the quantity of ARTHE CONCENTRATO indicated in the chart below to14 Lt.of STUCCOMARMO.